EcoPoxy GelCoat is an epoxy coating with superior chemical, abrasion, and thermal resistance. It is easily applied with a brush, roller, or sprayed to provide a smooth, non-porous high gloss finish on many surface types such as steel, concrete, composites, eps foam and wood. It is easy to use, wets out well over a variety of surfaces, and will coat vertical surfaces without sagging. It is designed as a finish coat and works well with laminating systems.
EcoPoxy GelCoat is widely used as an in-mold coating on composite parts to produce a durable part surface. It is a tough and strong surface coat resin that cures at room temperature and offers exceptional abrasion resistance. EcoPoxy Gelcoat is high viscosity and has the ability to be applied thickly on vertical and overhead surfaces in one coat and cures tacky on the surface to bond with laminations. For an impact resistant coating on EPS Foam, two coats are required to build an adequate thickness.
EcoPoxy GelCoat is a premium gel coat formulated to meet rigid requirements of boating, transportation, and containment applications. Applied in a thickness of 16-20 mils, which gives this gel coat depth to survive considerable water sanding, compounding, and re-polishing. EcoPoxy GelCoat provides superior cosmetics and a long term protective life expectancy.
GelCoat is specially formulated to be water-resistant and highly durable. GelCoat cures hard with a self-leveling finish, even on vertical surfaces. This formula is also resistant to water blistering from frequent use.
54:1 by volume
20 minutes depending on ambient temperature
16 mil.
100 sf/gal.
48 hours @ 70ºF. (21ºC.) @ 50% RH using spread rate of 100 sf/gal.
6-8 hours depending on ambient temperature, humidity and thickness.
6-8 hours
24 hours
Denatured Alcohol
55-85ºF. with lid tightly sealed
With retailers around the world and selling online, find EcoPoxy products where you are.
Find a Retailer