Shake Part B well before use. In a clean, dry container combine (by volume) 2 parts resin with 1 part hardener and mix thoroughly for 4-5 minutes. Add Liquid or Metallic pigments as desired and mix until evenly dispersed.
Working area should be clean, dry, and free of dust. FlowCast SPR can be poured at 6-25 mm (¼-1”) per layer. FlowCast SPR will not shrink while curing under normal conditions. However, it may slowly fill cracks and voids in live edge wood pieces, causing the resin level to drop. Be prepared to add more epoxy as needed.
Epoxy releases heat when curing. For pours deeper than 25 mm (1") and/or at a volume greater than 3 L, multiple thinner pours may be necessary to prevent overheating. For best adhesion between layers, wait until the first layer is fully set to touch. Sand with 220 grit sandpaper and wipe down before pouring another layer.